04. December 2022

Why You Need a Canned Motor Pump?

Canned motor Pumps-2f636de0

A canned motor pump is a type of pump that uses a sealed, pressurized enclosure (the “canned” part) to contain the moving parts of the pump. This eliminates the need for external seals and bearings, making the pump more reliable and easier to maintain.

Canned motor pumps are often used in applications where leaks could be catastrophic, such as in nuclear power plants or chemical processing facilities. They can also be used in less critical applications where conventional pumps might not hold up, such as in sewage treatment plants or farming operations.

 

There are several advantages to using a canned motor pump 

 

over a conventional pump

 

1. There are no external seals or bearings to worry about. This means that the risk of leaks is greatly reduced, and the pump is less likely to fail due to seal or bearing problems.

 

2. Canned motor pumps are much easier to maintain than conventional pumps. Because there are no external parts to worry about, all you need to do is periodically check the level of the fluid in the pump and make sure that the seals are still intact.

 

3. Canned motor pumps manufacturers are much more energy efficient than conventional pumps. This is because they don’t have to work as hard to move the liquid through the pump. As a result, they use less electricity and save money on your energy bill.

 

4. Canned motor pumps are much quieter than conventional pumps. This is because there are no moving parts inside the pump that can create noise.

 

Finally, canned motor pumps are more reliable than conventional pumps. This is because they don’t have any moving parts that can break down over time.

 

If you’re looking for a pump that is more reliable and easier to maintain, then a canned motor pump is the right choice for you.

 

What makes canned motor pumps different?

 

Canned motor pumps are different from traditional centrifugal pumps in a number of ways. First, they use hermetically sealed motors that are cooled and lubricated by the liquid being pumped. This allows for a more efficient transfer of energy, as well as eliminates the need for an external cooling system. Additionally, the pump impeller is directly connected to the motor shaft, providing a more direct transfer of power. 

 

This also reduces wear and tear on both the pump and motor, and extends the overall life of the pump. Finally, canned motor pumps are designed to operate in potentially hazardous environments where flammable or explosive liquids are being handled. This makes them an ideal choice for applications such as petroleum refining or chemical processing.

 

Leave a Reply

Your email address will not be published. Required fields are marked *